Grand Cherokee 4WD V6-3.0L DSL Turbo VIN M (2007)
5. Install the camshaft drive gear on the exhaust camshaft in the right cylinder head.
6. Install the upper two bolts into the camshaft drive gear and tighten to 18 Nm (159 in. lbs.).
7. Be sure that all of the timing marks are correctly aligned.
8. Rotate the engine and install the lower bolt into the camshaft drive gear. Tighten to 18 Nm (159 in. lbs.).
9. Install the timing chain tensioner and torque to 80 Nm (59 lbs. ft.).
10. Install the timing cover. See: Timing Cover/Service and Repair/Timing Cover - Installation
11. Install oil pan bolts. Tighten M6 bolts to 9 Nm (80 lbs. in.) and M8 bolts to 20 Nm (15 lbs. ft.).
12. Reconnect negative battery cable.
WARNING: USE EXTREME CAUTION WHEN THE ENGINE IS OPERATING. DO NOT STAND IN A DIRECT LINE WITH THE
FAN. DO NOT PUT YOUR HANDS NEAR THE PULLEYS, BELTS OR FAN. DO NOT WEAR LOOSE CLOTHES.