Patriot 4WD L4-2.4L VIN W (2007)
SPECIAL TOOLS/EQUIPMENT REQUIRED:
REPAIR PROCEDURE:
1.
Unbolt and lower the steering column to provide clearance to grind the down stop flag.
2.
Using a small hand grinder, remove material from the clutch switch down stop flag as shown in (Fig 2).
3. Make sure the corner of the flag is ground to a radius.
4.
Reinstall the steering column.
NOTE:
Leave enough material on the downstop flag to provide a contact area for the clutch switch.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE: