Wagoneer L6-258 4.2L VIN C 2-bbl (1982)
27. Install hazard warning light switch knob and steering wheel trim cover.
28. Install gearshift lever and lock cylinder assembly into column housing.
29. Place shift bowl in any detent position except Park, then rotate bowl counterclockwise until lock rack contacts lower surface of bowl.
30. Install ignition switch as follows:
a. Move switch slider toward the left (Accessory) position.
b. Move switch slider 2 positions toward the right into Off-Unlock position.
c. Insert remote rod into switch slider hole and install ignition switch onto steering column. Torque switch attaching screws to 35 inch lbs.
31. Install steering column.
32. Install lower finish panel, air conditioning duct, if equipped and column to instrument panel bezel.
33. Connect battery ground cable.
