Wrangler L4-2.4L VIN 1 (2006)
Wiper Motor: Service and Repair
Rear Wiper Motor Trim Cover
REMOVAL
Fig. 21 Rear Wiper Motor Trim Cover Remove/Install
1. From the inside of the liftglass, remove the three screws that secure the rear wiper motor trim cover to the motor mounting bracket.
2. Remove the trim cover from the rear wiper motor mounting bracket.
INSTALLATION
1. From the inside of the liftglass, position the trim cover onto the rear wiper motor mounting bracket.
2. Install and tighten the three screws that secure the trim cover to the rear wiper motor mounting bracket Tighten the screws to 1 N m (10 in. lbs.).