Wrangler L6-4.0L VIN S (2000)
Cigarette Lighter Relay: Service and Repair
WARNING: ON VEHICLES EQUIPPED WITH AIR-BAGS, REFER TO AIR BAGS AND SEAT BELTS/AIR BAGS BEFORE
ATTEMPTING ANY STEERING WHEEL, STEERING COLUMN, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE.
FAILURE TO TAKE THE PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIR-BAG DEPLOYMENT AND POSSIBLE
PERSONAL INJURY.
REMOVAL
1. Disconnect and isolate the battery negative cable.
Accessory Relay Remove/Install
2. Reach up under the instrument panel outboard of the steering column to access the accessory relay and the accessory relay wire harness connector,
which is secured to the 100-way wire harness connector mounting bracket.
3. Disconnect the accessory relay from the accessory relay wire harness connector.
4. Remove the accessory relay from under the instrument panel.
INSTALLATION
1. Position the accessory relay to the accessory relay wire harness connector under the instrument panel.
2. Align the terminals of the accessory relay with the cavities in the accessory relay wire harness connector.
3. Push on the accessory relay case firmly and evenly until all of the relay terminals are fully seated within the cavities of the accessory relay wire
harness connector.
4. Reconnect the battery negative cable.
