Borrego 2WD V6-3.8L (2009)
Hood Latch: Service and Repair
Hood Latch Replacement
1. Remove the front bumper cover.
2. Remove the hood latch cover (A).
3. Remove the hood latch (A) mounting bolts.
Tightening torque :
6.9 - 10.8N.m (0.7 - 1.1kgf.m, 5.1 - 8.0 lb-ft)
4. Disconnect the hood latch cable (A) and remove the latch (B).
5. Installation is the reverse of removal.
NOTE:
-
Make sure the hood latch cable is connected properly.
-
Make sure the hood locks securely.
