Borrego 2WD V6-3.8L (2009)
Parking Brake Pedal: Adjustments
Adjustment
Parking Brake Pedal Stroke Adjustment
1. Adjust the adjusting nut (B) so that parking brake pedal stroke is to be between 3 - 4notches when operating effort is 196 N (20 kg.f, 44 lb) after
full stroke operation of parking brake pedal over 3 times for setting parking wire.
2. Adjust cable stroke with the equalizer adjusting nut (D) inside floor console if the cable adjusting nut (B) can't be used because of insufficiency of
an adjusting section of the front cable.
CAUTION:
1. The parking brake adjustment must be carried out after adjusting the rear shoe.
2. After adjusting parking brake, check the following.
1) Must be free from clearance between adjusting nut and pin.
2) Check that the brake is not dragging.