Borrego 2WD V6-3.8L (2009)
Timing Chain: Service and Repair
Removal
Removal
CAUTION:
-
Use fender covers to avoid damaging painted surfaces.
-
To avoid damage, unplug the wiring connectors carefully while holding the connector portion.
NOTE:
-
Mark all wiring and hoses to avoid misconnection.
-
Turn the crankshaft pulley so that the No.1 piston is at top dead center.
1. Disconnect the negative cable(A) from the battery.
2. Loosen the drain plug and drain the engine coolant. Remove the radiator cap (A) to speed draining.
3. Remove the engine cover (A).
4. Remove the radiator grill upper guard (A).
5. Disconnect the AFS connector (A) and breather hose (B) and then remove the air cleaner assembly (C).
