Borrego 2WD V6-3.8L (2009)
NOTE:
Do not rotate engine counterclockwise.
21. Remove the lower oil pan (A).
Insert the blade of SST(09215-3C000) between the upper oil pan and lower oil pan. Cut off applied sealer and remove the lower oil pan.
NOTE:
-
Insert the SST between the oil pan and the ladder frame by tapping it with a plastic hammer in the direction of arrow.
-
After tapping the SST with a plastic hammer along the direction of arrow around more than 2/3 edge of the oil pan, remove it from the ladder
frame.
-
Do not turn over the SST abruptly without tapping. It be result in damage of the SST.
-
Be careful not to damage the contact surfaces of Upper oil pan and lower oil pan.
22. Remove the crankshaft pulley (A).
NOTE:
-
Use the SST(09231-2J200, 09231-2J210) to remove the crankshaft pulley bolt.
