kia Workshop Repair Guides

Kia Workshop Service and Repair Manuals

Canister Purge Solenoid > < Evaporative Emission Control System|Page 3991
Page 1
background image

Canister Purge Control Valve: Testing and Inspection

Inspection

1. Turn the ignition switch OFF.
2. Disconnect the PCSV connector.
3. Measure resistance between the PCSV terminals 1 and 2.
4. Check that the resistance is within the specification.

Specification :Refer to Specification Section

Canister Purge Solenoid > < Evaporative Emission Control System|Page 3991