kia Workshop Repair Guides

Kia Workshop Service and Repair Manuals

Driver Door Module (DDM)|Page 77 > < Driver Door Module (DDM)|Page 75
Page 9
background image

Outside Mirror Defogger

1. IN condition of IGN=RUN and ALT_L=ON, if Rear Defogger SW is "ON", send on Rear Defogger Ctrl message of IPM, DDM/ADM turn on the

O/S Mirror Defog.

2. If Rear Defogger SW is "off", send on Rear Defogger Ctrl message of IPM, DDM/ADM turn off the O/S Mirror Defog.
3. The priority order is CAN MESSAGE.

Other function
Illumination

1. When sending Park Tail Head Lamp Ctrl Message by off or DRL ON in IPM, ILLUMINATION output is turned off.
2. When sending Park Tail Head Lamp Ctrl Message by PARK TAIL ON or PARK LOW TAIL ON in IPM, ILLUMINATION output is turned on.

Courtesy Lamp

1. When a driver's seat door opens, ADM sends Assist Door Courtesy Lamp Ctrl Message on by RAM, and turns on Courtesy lamp.
2. When an assist's seat gate is closed, Assist Door Courtesy Lamp Ctrl Message is sent in OFF_DECAY, and, ADM Courtesy lamp, it's exposed to

light (2 ± 0.2, sec).

3. When an assist's seat gate is closed, Assist Door Courtesy Lamp Ctrl Message will be sent in OFF_DECAY, and when Message ON during

exposure to light forwards ADM Courtesy lamp, Courtesy lamp is turned on immediately.

4. IGN 'RUN' during exposure to light be, and when closing door in the IGN 'RUN' state, please send by Assist Door Courtesy Lamp Ctrl Message

off. and turns off Courtesy lamp immediately

5. When 20 minutes pass in the state which opened, an assist's seat door sends Assist Door Courtesy Lamp Ctrl Message off by Key reminder SW

OFF, and ADM will turn off Courtesy lamp immediately.

6. When being exposed to light, when the resolution is exposed to light beyond 32step, you aren't supposed to shake.

Side Repeater Lamp

When Turn indicator message is being forwarded to on, Side Repeater Lamp On.

Power Consumption

1. All subordinate's output is off, and SW related to WAKE - UP is by the state that everything is off. When SC Message in CAN IPM forwards

everything to S (Sleep) in the off state, enters SLEEP MODE.

2. WAKE-UP related SW is same as the bottom.
3. The above 2) when effective input also occurs in SW of whole one item, WAKE-UP will be immediately.
4. When sending WAKE-UP Message from other MODULE, WAKE-UP will be immediately.
5. It's done within 2 mA of blackout kinds.

P/WDW Main SW Wake Up Signal Check (Sleep Prohibition)

Driver Door Module (DDM)|Page 77 > < Driver Door Module (DDM)|Page 75