Borrego 2WD V6-3.8L (2009)
Relay Box: Testing and Inspection
Fuse & Relay Box (Engine Compartment)
Inspection
Fuse
1. Be sure there is no play in the fuse holders, and that the fuses are held securely.
2. Are the fuse capacities for each circuit correct?
3. Are there any blown fuses?
If a fuse is to be replaced, be sure to use a new fuse of the same capacity. Always determine why the fuse blew first and completely eliminate the
problem before installing a new fuse.
Relay
1. Ensure that relays are securely installed.
2. Are the relay types for each circuit correct?
3. If a relay-operated system does not operate properly, verify the condition of the relay and replace the relay (if inoperative) before continuing with
additional troubleshooting.
