Borrego 2WD V6-3.8L (2009)
3. Connect the interlock switch connector (A).
4. After Install the control cable nut (A), Install the shift cable in the 'F' direction by pulling the clip (B) on the floor.
Tightening torque :
9 - 13 Nm (1.0 - 1.4 Kgf.m, 7.2 - 10.1 lb-ft)
5. Install the center console(A).
6. Install the trey(A).
7. Remove the center console cover(A).
8. Insert the shift lever knob (A) with the specified force.