Borrego 4WD V6-3.8L (2009)
Rear Door Panel: Service and Repair
Door Trim Replacement
NOTE:
-
Be careful not to scratch the door trim and other parts.
-
Put on gloves to protect your hands.
1. Remove the delta inner cover (A).
2. Remove the inside handle cover (A).
3. Loosen the door trim (A) mounting screws. Release the clips that hold the door trim.
4. Remove the inside handle cage (A).
5. Installation is the reverse of removal.
NOTE:
-
Make sure connectors are connected properly and each rod is connected securely.
-
Make sure the door lock and opens properly.
