Borrego 4WD V6-3.8L (2009)
Seat Cushion: Service and Repair
Front Seat
Seat Cushion Cover Replacement
1. Remove front seat assembly.
2. Remove the recliner cover.
3. Disconnect the connectors (A).
4. After disconnect the protector (A), remove the seat cushion (B).
5. After removing the hogring clip on the front of seat cushion and remove the seat cushion cover (A).
6. Installation is the reverse of removal.
NOTE:
-
Use Hi-Scan tool to re-zero PODS system after replacing component. (Passenger's)