Borrego 4WD V6-3.8L (2009)
Seat Heater: Service and Repair
Seat Cushion Heater
Seat Cushion Heater Replacement
1. Remove the seat cushion cover.
2. Cut the heater (B) attached to the sponge(A), as shown in the picture.
CAUTION:
-
Be careful not to damage the slave sponge.
3. Install the seat cushion cover.
A. Detach the paper from the cushion of the heater assembly.
B. Attach the heater to the main part of the sponge.
CAUTION:
-
Be sure to match the heater with main appearance.
NOTE:
-
Use HI-Scan tool to re-zero PODS system after replacing component. (Passenger's)