Borrego 4WD V6-3.8L (2009)
3. Remove the rear brake disc by loosening the screws (A).
Replacement
Rear Brake Pads
1. Loosen the guide rod bolt (B) and pivot the caliper up out of the way.
Tightening torque:
21.6 - 31.4 N.m (2.2 - 3.2 kgf.m, 15.9 - 23.1 lb-ft)
2. Replace pad shim (D), pad retainers (C) and brake pads (B) in the caliper bracket (A).
Installation
1. Installation is the reverse of removal.
2. Use a SST (09581-11000) when installing the brake caliper assembly.
3. After installation, bleed the brake system.