Borrego 4WD V6-3.8L (2009)
3. Remove the brake fluid from the master cylinder reservoir with a syringe.
CAUTION:
-
Do not spill brake fluid on the vehicle, it may damage the paint; if brake fluid does contact the paint, wash it off immediately with water.
4. Disconnect the brake tube (A) from the master cylinder by loosening the tube flare nut.
Tightening torque:
ABS : 12.7 - 16.7N.m (1.3 - 1.7kgf.m, 9.4 - 12.3lb-ft)
ESC : 18.6 - 22.6N.m (1.9 - 2.3kgf.m, 13.7 - 16.6lb-ft)
5. Remove the master cylinder (B) from the brake booster after loosening the mounting nuts (C).
Tightening torque:
12.7 - 16.7N.m (1.3 - 1.7kgf.m, 9.4 - 12.3lb-ft)
Installation
1. Installation is the reverse of removal.
2. After installation, bleed the brake system.
