Location and Repair of Borrego 4WD V6-38L Radiator Components
7. Disconnect the power steering fluid cooler pipe (A) from the cooling module by loosen the bolts.
Tightening torque :
8.8 - 13.7N.m (0.9 - 1.4kgf.m, 6.5 - 10.1lb-ft)
8. Remove the radiator.
(1) Disconnect the fan motor connector (A).
(2) Disconnect the ATF cooler hoses (B).
(3) Remove the cooling module mounting nuts (C).
Tightening torque :
18.6 - 27.5N.m (1.9 - 2.8kgf.m, 13.7 - 20.3lb-ft)
(4) Remove the cooling module from the vehicle.
(5) Separate the fan assembly and radiator assembly.
Installation
1. Installation is reverse order of removal.
2. Connect the fan motor connector.
3. Install the radiator upper hose & lower hose, and connect the ATF cooler hoses.
4. Fill the radiator with coolant and check for leaks.
