Borrego 4WD V6-3.8L (2009)
17. Remove the drive belt idler (A).
18. Remove the drive belt auto tensioner (A).
19. Remove the water pump pulley (A).
20. Set No.1 cylinder to TDC/compression.
(1) Turn the crankshaft pulley clockwise and align its groove with the timing mark "T" of the lower timing chain cover.
(2) Check that the mark (A) of the camshaft timing sprockets are lined up on the cylinder head surface as shown in the illustration. If not, turn the
crankshaft clockwise one revolution (360°).