Borrego 4WD V6-3.8L (2009)
Combination Switch: Service and Repair
Repair Procedures
Removal
1. Disconnect the negative (-) battery terminal.
2. Remove the steering column upper and lower shrouds (A) after removing 3 screws.
.
3. Remove the lighting switch (A) by pushing the lock pin (B) after disconnecting the connector.
4. Remove the wiper switch (A) by pushing the lock pin (B) after disconnecting the connector.
Installation
1. Install the wiper switch after connecting the connector.
2. Install the lighting switch after connecting the connector.
3. Install the steering column upper and lower shrouds.