Borrego 4WD V6-3.8L (2009)
IPM
The light MF switch is connected to the IPM and is used to command the park lamps, tail lamps and the headlamps low beam.
Description
MF Light sw status definition:
The Auto light Sensor signal status value is defined thanks to the Auto light sensor value (input "Auto light sensor 5V return").
Description
Auto light Sensor signal Sts definition:
NOTE:
These values can be calibrated on the real vehicle depending on the customer's request. The calibrated values are prior to the specification.
RAM
The RAM drives the tail lamps.
Description
Tail lamps truth table:
The tail lamps are controlled depending on the Park Tail Head Lamp control value.