Borrego 4WD V6-3.8L (2009)
Air Bag: Removal and Replacement
Components and Components Location
Components
Repair Procedures
Removal
1. Disconnect the battery negative cable and wait for at least three minutes before beginning work.
2. Remove the airbag module mounting bolts (2EA).
3. Disconnect the horn connector (A).
4. Release the connector locking pin, then disconnect the driver airbag module connector(B).
CAUTION:
The removed airbag module should be stored in a clean, dry place with the pad cover face up.
5. Remove the steering wheel and steering wheel column cover.