Borrego 4WD V6-3.8L (2009)
Power Door Lock Switch: Service and Repair
Replacement
DDM (Drive Door Module)
1. Disconnect the negative battery terminal.
2. Remove the front door trim panel.
3. Remove the door module (A) mounting screws (5EA) after disconnecting the connector (3EA) from the module.
4. Remove the front door modules (DDM) (A) from the front door trim panel.
ADM (Assist Door Module)
1. Disconnect the negative(-) battery terminal.
2. Remove the front door trim panel.
3. Remove the door module (A) mounting screws (5EA) after disconnecting the connector (3EA) from the module.
4. Remove the front door modules (ADM) (A) from the front door trim panel.