Borrego 4WD V6-3.8L (2009)
Interior 2 Antenna
1. Disconnect the negative (-) battery terminal.
2. Remove the console assembly (A).
3. After loosening the connector mounting bracket nuts at the back of the console, disconnecting the interior 2 antenna connector.
4. After loosening the nuts(2EA), remove the interior 2 antenna(A).
Interior 3 Antenna
1. Disconnect the negative (-) battery terminal.
2. After loosening the mounting bolts, then remove the third seat assembly(A).
3. After loosening the connector mounting bracket nut(1EA), disconnect the antenna connector(A).
4. After loosening the nuts(2EA), remove the interior 3 antenna(B).
Exterior Bumper Antenna