Borrego 4WD V6-3.8L (2009)
Stabilizer Bar: Service and Repair
Front Stabilizer Bar
Replacement
1. Disconnect the stabilizer links (A) with the knuckle.
Tightening torque:
100 - 120N.m (10.0 - 12.0kgf.m, 72 - 87lb-ft)
2. Remove the stabilizer bar from the frame by loosening the mounting bolts (A).
Tightening torque:
45 - 55N.m (4.5 - 5.5kgf.m, 33 - 40lb-ft)
3. Installation is the reverse of the removal.
