Borrego 4WD V6-3.8L (2009)
Repair procedures
Replacement
1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported.
2. Remove the front wheel and tire from front hub.Caution)
CAUTION:
Be careful not to damage to the hub bolts when removing the front wheel and tire.
3. Remove castle nut(A) from the front hub under applying the break.
Tightening torque :
204.2 - 269.6N.m(24.5 - 27.5Kgf.m, 177.2 - 198.9lb.ft)
4. Remove the brake caliper mounting bolts (A), and then place the brake caliper assembly (B) with wire.
Tightening torque :
83.3 - 98.0N.m(8.5 - 10.0Kgf.m, 61.4 - 72.3lb.ft)