Forte L4-2.0L (2010)
button.
2. Say "Set Up".
3. Say "Pair Phone".
4. Say "Yes".
5. Say the name of the contact.
6. Say "Yes".
7. The Pairing procedure of the cellular-phone varies according to each cellular-phone.
NOTE:
The system may not function in the following cases:
If 5 phones have already been registered.If the system cannot communicate with the phone.
To connect phone
The registered phones can be selected. When the system connects to Bluetooth, the phone previously used is automatically selected. Select a different
phone if necessary. Only the selected phone can be used with the hands-free system.
1. Press the
button.
2. Say "Set Up".
3. Say "Select Phone".
4. Say the name of the contact or the number of the contact.
5. Say "Yes".
NOTE:
The system may not function in the following cases:
If the phone is not found.
If the system does not recognize the voice command.
Deleting phone
The registered phones can be deleted.
1. Press the
button.
2. Say "Set Up".
3. Say "Delete Phone".
4. Say the name of the contact, the number of the contact or "Delete all phone".
5. Say "Yes".
Receiving a phone call
When receiving a phone call, a ring tone is audible and the system changes into telephone mode.
When receiving a phone call, the phone number and the message "Incoming" will be displayed.
-
Do either one of the following:
Press the send switch to take the call. Press the end switch to refuse the call.
-
To adjust the ring volume, push "+" or "-" on the steering volume controls.
Volume adjustment cannot be made using the audio system.
-
To transfer a call to the phone:
The received call can be transferred from the hands-free system to the cellular-phone that is connected to Bluetooth.
For details, please refer to you user's manual for the cellular phone or go to the Key matrix in this manual (next page).
Talking on the phone
When talking on the phone, the display will differ depending on whether or not the vehicle is in motion.
Number and "active call" is displayed.
When the call is finished, press the end switch.
NOTE: