Forte L4-2.0L (2010)
Bead width :2.5mm (0.1in.)
(4) After applying liquid sealant Loctite 5900H on timing chain cover.
The part must be assembled within 5 minutes after sealant was applied.
Sealant should be applied without discontinuity.
Bead width :2.5mm (0.1in.)
(5) The dowel pins on the cylinder block and holes on the timing chain cover should be used as a reference in order to assemble the timing chain
cover to be in exact position.
Tightening torque :
M6: 7.84 - 9.8N.m (0.8 - 1.0kgf.m, 5.8 - 7.2lb-ft)
M8: 18.6 - 22.5N.m (1.9 - 2.3kgf.m, 13.7 - 16.6lb-ft)
CAUTION:
The firing and/or blow out test should not be performed within 30 minutes after the timing chain cover was assembled.
11. Install oil pan.
(1) Using a gasket scraper, remove all the old packing material from the gasket surfaces.
(2) Before assembling the oil pan, the liquid sealant Loctite 5900H should be applied on oil pan.
The part must be assembled within 5 minutes after the sealant was applied.
Sealant :Loctite 5900H or equivalent