Forte L4-2.0L (2010)
(4) Turn Power window Relay output OFF when IGN2 is OFF while Driver Door switch or Passenger Door switch is open.
T1 : 30 ± 3sec
Door Lock/unlock Control
1. Door Lock/unlock Control Data Flow
2. Door Lock/unlock Relay Control (2-Turn Unlock)
(1) Non-applicable Spec For 2-Turn
(1) If Driver door Key Unlock Switch turns OFF from ON within T1 after Driver door Key Unlock Switch turns ON from OFF(Driver door
Unlock Switch becomes UNLOCKED mechanically and does not output BCM.), turn Door Unlock Relay output ON during T2.
(2) If TUNLOCK is received within T1 after Driver door key unlock switch turns ON from OFF(Driver door unlock switch becomes
UNLOCKED mechanically and does not output BCM.), turn Driver door unlock relay and Door unlock relay output ON during T2.
(3) Turn Driver door unlock relay output ON during T2 when receiving TUNLOCK signal. However, turn Driver door unlock relay and Door
unlock relay output during T2 if TUNLOCK is received within T1.
(4) Also, turn Driver door unlock relay and Door unlock relay ON during T2 in case that Driver door key unlock switch turns ON from OFF
within T1 after receiving TUNLOCK.
(5) Regard as the same TX even though different signal which is registered within T1 is received.