Forte L4-2.0L (2010)
Engine Control Module: Service and Repair
Removal
NOTE:
In the case of the vehicle equipped with immobilizer, perform "Key Teaching" procedure together .
1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
2. Remove the air cleaner assembly .
3. Disconnect the ECM Connector (A).
4. Remove the mounting bolts, and then remove the ECM from the air cleaner assembly.
Installation
NOTE:
In the case of the vehicle equipped with immobilizer, perform "Key Teaching" procedure together .
1. Installation is reverse of removal.
ECM installation bolt:
9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb-ft)