Forte L4-2.0L (2010)
8. CONNECTOR IDENTIFICATION
A connector identification symbol consists of a wiring harness location classification symbol corresponding to a wiring harness location and
number corresponding to the connector.
These connector locations can be found in the HARNESS LAYOUTS.
For example:
NOTE: Connectors which connect each wiring harness are represented by the following symbols.
For example:
JUNCTION BLOCK IDENTIFICATION
A junction block identification symbol consists of a wiring harness location classification symbol corresponding to a wiring harness location and number
corresponding to the connector in the junction block.
For example:
HARNESS LAYOUTS
Harness layouts show the routing of the major wiring harnesses, the in-line connectors and the splices between the major harnesses. These layouts will
make electrical troubleshooting easier.
Symbols