Forte L4-2.0L (2010)
4. Remove the center pillar lower trim (A).
5. Remove the center pillar upper trim (B).
6. Remove the upper anchor (A).
Tightening torque :
39.2 - 53.9 N.m (4.0 - 5.5 kgf.m, 28.9 - 39.8 lb-ft)
7. After disconnecting the pretensioner connector lock pin, remove the pretensioner connector (B), Loosen the mounting bolt, then remove the
pretensioner (C).
8. Installation is the reverse of removal.
Rear Seat Belt
Replacement