Forte L4-2.0L (2010)
4. Remove driveshaft nut(B) from the front hub under applying the break.
Tightening torque:
196.1 - 274.5N.m(20.0 - 28.0Kgf.m, 144.6 - 202.5lb.ft)
5. Remove the brake caliper mounting bolts (A), and then place the brake caliper assembly (B) with wire.
Tightening torque:
80 - 100 N.m (8.0 - 10.0 Kgf.m, 58 - 72.3lb.ft)
6. Remove the tie rod end ball joint from the knuckle.
(1) Remove the split pin(A).
(2) Remove the castle nut(B).
(3) Disconnect the ball joint(C) from knuckle using the special tool (09568-4A000).
Tightening torque:
23 - 32 N.m (2.4 - 3.4 Kgf.m, 17 - 25 lb.ft)