Optima V6-2.7L (2003)
Center Mounted Brake Lamp: Removal and Replacement
Removal and Installation
STOP LAMPS HIGH MOUNTED STOP LAMP
REMOVAL
1. Disconnect negative battery cable.
2. Open trunk lid.
3. Remove two nuts that attach light assembly to vehicle.
4. Disconnect electrical connector from light assembly;
remove light assembly.
INSTALLATION
1. Connect electrical connector to light assembly.
2. Position light assembly on package tray.
3. Install two nuts attaching light to vehicle.
4. Connector negative battery cable.
Replacement
STOP LAMPS HIGH MOUNTED STOP LAMP
REPLACEMENT
1. Disconnect negative battery cable.
2. Open trunk lid.
3. Remove socket from light assembly.