Optima V6-2.7L (2003)
Fuel Tank Cut Valve: Recalls
Recall - Fuel Cut Valve Installation
VOLUME
3
GROUP
Campaign
NUMBER
038 (Revised)
MODEL
Optima
DATE
June 2004
SUBJECT
Safety Recall: Optima Fuel Cut Valve Installation
This bulletin provides information related to 2002-2003 MY Optima installation of a fuel cut valve in addition to the fuel cut valve (rollover valve)
already installed on the fuel tank. Some 2002-2003 Optima vehicles may contain a fuel tank assembly fuel cut valve that may not close properly. If a
vehicle with a fuel tank assembly fuel cut valve that may not close properly were to roll over, fuel spillage could occur.
Use the procedures to install the new fuel cut valve.
* NOTICE
There is no charge to the customer for this repair. Under applicable law, you may not sell or otherwise deliver any affected 2002-2003MY
Optima until it has been repaired, pursuant to the procedures set forth in this bulletin.
INSPECTION PROCEDURE: