kia Workshop Repair Guides

Kia Workshop Service and Repair Manuals

Recall - Crankshaft Position Sensor Replacement|Page 437 > < Recall - Crankshaft Position Sensor Replacement|Page 431
Page 1
background image

Crankshaft Position Sensor: Recalls
Recall - Crankshaft Position Sensor Replacement

VOLUME

3

GROUP
Campaign

NUMBER

021

MODEL
Optima

DATE
March 2003

SUBJECT
Crankshaft Position Sensor - Recall Campaign

This bulletin provides information on a recall campaign to replace the Crankshaft Position Sensor (CKP) on certain Optima 2.5 and 2.7 liter V-6 engines.

The CKP installed in some 2001 and 2002MY Optima models equipped with 2.5 and 2.7 liter V-6 engines produced between 9/9/00 and 8/17/01 may
have a manufacturing defect involving damage to a capacitor on its internal printed circuit board. A CKP with a damaged capacitor could cause engine
stalling.

To correct this situation, Kia is recalling affected 2001 and 2002MY Optima V-6 models to replace the CKP

NOTICE

There is no charge to the customer for this repair. Under applicable law, you may not sell or otherwise deliver any affected 2001 or 2002 Optima
until it has been repaired, pursuant to the procedures set forth in this bulletin.

WARNING

Failure to follow procedures, or failure to adhere to WarningsCautions, and Notices could result in personal injury and/or unnecessary vehicle
repairs.

INSPECTION:

1.

Open hood.

Recall - Crankshaft Position Sensor Replacement|Page 437 > < Recall - Crankshaft Position Sensor Replacement|Page 431