Optima V6-2.7L (2003)
4. Install the needle bearing in the gear housing using special tool (09222-21100).
5. Set the scribed side of the oil seal (inner) in the special tool (09431-11000) and install in the gear housing.
CAUTION:
1) Note the direction of the oil seal.
2) Use a new oil seal.
6. Apply the specified fluid to the entire surface of the rack bushing oil seal.
Recommended fluid Power steering fluid (PSF-3)
7. Install the oil seal on the rack bushing.
8. Apply the specified fluid to the entire surface of the O-ring and install to the rack bushing using the special tool (09431-11000).
9. Apply the specified grease to the rack teeth and wrap with vinyl tape.
Recommended grease Multipurpose grease SAE J310a, NLGI grade #2 EP
CAUTION: Do not plug the vent hole in the rack with grease.
All cautions must clearly state the possible harmful result or risk. What would happen if the vent hole was plugged with grease?
