Optima V6-2.7L (2003)
17. With the pinion turned all the way clockwise, tighten the self-locking nut.
CAUTION: Always replace the self-locking nut with a new one.
18. Apply semi-drying sealant to the threaded section of the end plug and tighten to the specified torque.
Tightening torque 50 - 70 Nm (500 - 700 kg-cm, 36 - 51 ft. lbs.)
19. Stake the end plug at two points on its circumference with a punch.
20. Install the tab washer and then the tie rod and peen the tab washer end at two points to the tie rod.
CAUTION:
1) Align the tab washer pawls with the rack grooves.
2) Use a new tab washer.
21. Install the bushing, rack support, rack support spring and rack support cover in the order shown. Apply thread sealant to the threaded section of the
rack support cover before installation.
