Optima V6-2.7L (2003)
3. Check the shock absorber for abnormal resistance or unusual sounds.
NOTE: When discarding the gas pressurized shock absorber, follow the disposal procedure.
DISPOSAL
1. Fully extend the shock absorber rod.
2. Drill a hole to remove gas from the cylinder.
CAUTION: The gas coming out is harmless, but be careful of chips that may fly up when drilling.
REASSEMBLY
1. Install the special tool, spring compressor, on the coil spring and compress the spring.
After spring is fully compressed, install it on the shock absorber assembly.
NOTE:
1. Do not use an impact wrench.
1 of 2
