Optima V6-2.7L (2003)
1. Install the special tool, spring compressor, on the coil spring and compress the spring.
After spring is fully compressed, install it on the shock absorber.
NOTE:
1. Do not use an impact wrench.
1 of 2
2 of 2
2. Coil spring installation chart to load classification
2. Install the dust cover, bushing (B), upper spring pad, bracket, bushing (A) and washer in this order and tighten the new self-locking nut
temporarily.
3. Position the upper and lower ends of the coil spring in the upper spring pad and lower spring seat groove.
CAUTION:
1. Install so that the upper spring pad is fit in the shock absorber mounting bracket correctly.
2. Install so that the spring urethane tube is located down.