Optima V6-2.7L (2003)
Heated Glass Element: Service and Repair
REPAIR OF BROKEN HEATER LINE
Prepare the given items:
1. Conductive paint.
2. Paint thinner.
3. Masking tape.
4. Silicone remover.
5. Thin brush.
Wipe the glass adjacent to the broken heater line, clean with silicone remover and attach the masking tape as shown. Shake the conductive paint
container well, and apply three coats with a brush at intervals of about 15 minutes apart. Remove the tape and allow sufficient time for drying
before applying power.
For a better finish, scrape away excess deposits with a knife after the paint has completely dried, (allow 24 hours).
CAUTION: After repairing, clean the glass with a soft dry cloth or wipe along the grid line with a slightly moistened cloth.
