Optima V6-2.7L VIN 4 (2007)
When the wheel tilts out at the top, then the camber is positive (+).
When the wheel tilts in at the top, then the camber is negative(-).
Standard value : -0.5° ± 30' / Difference between right and left angle is within 0° 30'
NOTE:
Camber is pre-set at the factory and doesn't need to be adjusted. If the camber is not within the standard value, replace the bent or damaged parts.
NOTE:
a. The worn loose or damaged parts of the front suspension assembly must be replaced prior to measuring front wheel alignment.
b. Caster are pre-set to the specified value at the factory and don't need to be adjusted.
c. If the caster are not within specifications, replace bent or damaged parts.
d. The difference of left and right wheels about the the caster must be within the range of 0° ± 30'.
