Optima V6-2.7L VIN 4 (2007)
6. Remove the rear assist arm (A) mounting nut (B) from the cross member.
INSTALLATION
1. Install the rear assist arm (A) mounting nut (B) to the cross member.
Tightening torque Nm (kgf.m, lb-ft) : 78.5 - 98.1 (8.0 - 11.0, 57.9 - 72.3)
2. Install the rear assist arm (A) ball joint self-locking nut (B) and the cotter pin.
Tightening torque Nm (kgf.m, lb-ft) : 44.1 - 53.9 (4.5 - 5.5, 32.5 - 39.8)
3. Install the brake caliper assembly (A) mounting bolts (B).
Tightening torque Nm (kgf.m, lb-ft) : 49.0 - 58.8 (5.0 - 6.0, 36.2 - 43.4)
4. Install the wheel and the tire (A) to the rear hub (B).