Optima V6-2.7L VIN 4 (2007)
Stabilizer Bar: Removal and Replacement
Front Stabilizer Bar
REMOVAL
1. Remove the connecting bolt (A) between the steering universal joint assembly (B) and the pinion assembly.
2. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported.
3. Remove the front wheel and tire (A) from front hub (B).
CAUTION:
Be careful not to damage the hub bolts (C) when removing the front wheel and tire (A).
4. Remove the front stabilizer link (A) nut (B) from the strut assembly.
5. Remove the brake caliper (A).
6. After removing both sides of the tie rod end (A) self-locking nuts, remove the ball joint by using the special tool(09568-4A000).