Optima V6-2.7L VIN 4 (2007)
4. Using the SST(09411-11000), install a disc(A).
CAUTION:
a. On vehicles with 2.4L gasoline engines, replace a clutch cover and disc as a set.
b. Apply grease on a disc spline part and transmission input shaft spline part as required.
-> How to do: apply grease(CASMOLY L9508) 0.2gr. on the transmission input shaft spline part.
c. The 'T/M SIDE' marked surface should face the transaxle.
-> If the surface face the opposite side, there can be an interference between a disc and a flywheel surface.
5. Tighten the clutch cover.
TORQUE: 11.8-14.7Nm (120-150kgf.cm, 8.7-10.8lb-ft) (2.4L-9EA)