kia Workshop Repair Guides

Kia Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 1
background image

Heated Glass Control Module: Service and Repair
Rear Window Defogger

INSPECTION

1. Disconnect the negative (-) battery terminal.
2. Remove the junction box.
3. Check for continuity between the terminals.
4. There should be continuity between the No.2 in the I/P-G connector and No.7 terminal in the I/P-C connector when power and ground are

connected to the No.2 terminal in the I/P-G connector and No.8 terminal in the I/P-C connector.

5. There should be no continuity between the No.2 terminal in the I/P-G connector and No.7 terminal in the I/P-C connector when power is

disconnected.

Windows and Glass > Heated Glass Element > Heated Glass Control Module > Component Information > Service and Repair > Rear Window Defogger

< PREV PAGE NEXT PAGE >