Optima V6-2.7L VIN 8 (2006)
2. Remove inside rearview mirror by prying its base cover off, and then removing two screw.
3. Remove LH and RH windshield wiper arms by removing one nut each.
4. Remove cowl vent.
5. Remove the rubber molding from around the windshield. Start at a corner.
6. Pierce the sealant with a pull knife and cut all the way around the windshield from outside the vehicle.
7. Remove the glass to a safe place.
INSTALLATION
1. Remove the excess sealant from the glass with a window scraper.
2. Remove the excess sealant and foam dam from the body with a knife.
3. Clean the inside of the glass with commercial glass cleaner and a lint-free cloth.
4. Prime an area approximately 3/4 inch (19 mm) wide around the complete perimeter of the glass.
