Rio L4-1.6L (2004)
6. Remove one screw on right side of front trim.
7. Remove snap ring and regulator handle from front door trim.
8. Unfasten front door trim with a trim removal tool.
9. Remove front door trim by lifting front door trim up.
Installation
1. Place front door trim.
2. Install regulator handle to front door trim.
3. Install one screw to right side of front trim.
4. Install three screws to front trim.
5. Install one screw to door pull handle.
6. Install one screw to inside door handle.
7. Install inner garnish.
