Rio L4-1.6L (2004)
Brake Pedal Assy: Testing and Inspection
Brake Pedal Height
BRAKE PEDAL HEIGHT
Verify that the distance from the center on the pedal pad to the dash lower panel mat is as specified.
Specification: 6.69 - 6.93 inch (170 - 176 mm)
Adjustment
1. Disconnect the stoplight switch connector
2. Loosen the locknut (B) and turn the switch (A) until it does not contact the pedal.
3. Loosen the locknut (D) and turn the rod (C) to adjust the height of the brake pedal.
4. Tighten the stoplight switch until it contacts the pedal then turn it an additional 1/2 turn. Tighten the locknuts (B) and (D).
Tightening torque: 23.5 - 34.3 Nm (2.4 - 3.5 kg-m, 17.4 - 25.3 ft. lbs.)
5. Verify the operation of the stoplights.
